|
|||||||
|
|||||||
| Home | Forums | Register | FAQ | Search | Today's Posts | Mark Forums Read |
|
Welcome to the misticriver forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
October 30th, 2005, 10:04 AM
|
|||
|
|||
IMP 350 slimX don't start
Hello,
Sorry for my english...  My imp 350 don't want to start, I open it, and it's a component is dead. But it burn and the specifications is unreadable. In enclosures a picture of the main board. Anyone else who possess the same and can open it and read the specifications help me a lot.      
|
|
December 30th, 2005, 02:01 PM
|
|||
|
|||
|
You may want to try and call or email iriver. My warrenty expired a year before i returned it and they still accepted it. My problem was that the motor for moving the laser wasn't working correctly. I wouldn't recommend trying to fix a burned piece of circutry unless you have a degree in electrical engineering. Hope this helps
__________________
H320 US imp350 ifp 340
|
|
Linear Mode
