This image is the top of the content box. Unfortunately, there is no information-based reason for this div to be here. It's just here for design reasons. Sorry.
Go Back   MisticRiver :: For iriver Enthusiasts > iriver (Reigncom) > iRiver Flash Players > iFP Series General
iFP-795 On/Off switch Repair iFP-795 On/Off switch Repair
Home Forums Register FAQ Search Today's Posts Mark Forums Read


Welcome to the misticriver forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old March 8th, 2006, 07:16 PM
Newbie Floating Down The Mistic River
  
Join Date: Mar 2006
Posts: 2
iFP-795 On/Off switch Repair
On/Off button on our iFP-795 stopped working, so I opened up the case and found that the tiny grey/white on/off switch inside has dislodged from the circuit board. After searching and reading the posts, it seems I'm not the first to suffer this problem.
Has anyone been able to successfully solder it back into place ?
If so, can you please describe what soldering locations you used. I'm a rookie at electonic repairs of this nature.
I'm not sure, first of all, if solder location is on the "top" side of the circuit board that the switch sits on, or whether it's on the "bottom" side of the board.
If it is on the "top" side, it appears the solder point might be at the "bottom end" of the switch(furthest away from the on/off button that activates the switch), but again, I'm not sure.
Thanks for any help you can provide.
..brasha
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old October 19th, 2006, 10:37 PM
Newbie Floating Down The Mistic River
  
Join Date: Oct 2006
Posts: 2
Hi,

I'm interested in fixing this issue myself on my IFP 799. How did you open it? I tried opening mines but the casing is too hard to open up.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old October 30th, 2007, 06:52 AM
Newbie Floating Down The Mistic River
  
Join Date: Oct 2007
Posts: 2
Openning ifp 799 case
It's not difficult to open the case. After you unscrew the 4 screws on its back, it has two "teeth" each one beside the buttons. On the side of the hold switch, tehre are three "teeth". To unlock the "teeth" just slide your nail into the side aperture, you will release the front. Mine is with a problem in the joy button. Can any one help me.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

« Previous Thread | Next Thread »

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 01:28 AM.

Contact Us - MisticRiver :: For iriver Enthusiasts - Archive - Top

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
This image is the bottom of the content box. Unfortunately, there is no information-based reason for this div to be here. It's just here for design reasons. Sorry.