H3mod Fontpacks

[Dark Samurai 1]

here is a font that i am using on my current skin. i only have the 12x16 extended part edited, but thats all you really need to change to have a good effect. Enjoy!

[shadows_fall]

I'm amazed at how people can come up w/ these fonts and skins. I haven't attempted it yet, but how hard is it, really? Does it require a lot of time? Just curious...

[ghostface_killah24]

To come up with the fonts or skins; or to actually put them on the device. Well skins I believe are harder, fonts can be fustrating with the little cut offs. Other than that, I think Fonts are fun, you should try it.

[aokh1979]

Hi:

I am happy with the English font, but I am very upset with the Korean font. I was trying to change / replace it with some other font on my system, however Hangul is the one that I cannot replace, by using H3mod. Why ? Can someone tell me why ?


Allan

[Lord Julius]

My knowledge of the Korean writing system is very limited, but I think
that the hangul syllables are combined of a limited set of elements. So
instead of storing >11000 Hangul syllable signs, iriver only stores the
small elements, in different sizes depending on where in the character
they are used.

To automatically replace a font, H3Mod needs the unicode id of characters,
and since for Hangul there are no unicode characters, but only graphic
elements, it can't be done.

You can still change them: save the iriver Hangul font to a gif file, and
edit it in a graphics editor. Just write some Korean text in the font of
choice and cut and paste the elements over the iriver ones. Then load
the gif back into the font dialog. If you take care that the new elements
are not bigger than the old ones, you should be fine.

[aokh1979]

Hi Julius:

Thanx for your response. You're right on the elements that form up Korean characters. I know Korean, but it's going to be a tough job to edit as GIF, one by one. The characters shown in the table are way too small and I need to spend much time to edit each of them. Can you recommend a graphic tool that you used to create yours (besides Hangul) ? Thanx.

[PaaP]

Yo Mixin I want to upload my Favorite Font it is
Tempus Sans ICT

I dont know How to Upload it?? But this font is on everyones PC. So please could u Upload my Font I really dont know how to 100% n00b in that stuff

PaaP

[PaaP]

lala test test

[Jolt]

Originally Posted by PaaP

lala test test

What?

I'm afraid mixin has not been online in a while, "around the world trip" comes to mind, so your request for hosting will not be answered any time soon.

__

[Denny]

I doubt that font will be made to work on the H300's. Its far to wide and would require alot of editing to make it fit properly.

[PaaP]

Ow ok.
I have another qeustion. When i installed the font with:
-> Open H3mob
-> Text
-> Font....
-> Load
-> Replace

After I did my firmudate he wont change the numbers like:
128K or this Elapsed 00.14 | 3.15 He wont change those numbers. :S

[Denny]

The font template used to display those numbers is Identical to 'latin extended 8x16' IIRC, but is yet to be found in the firmware. If you want to change those you can either wait untill a somebody finds the image in the firmware or hunt it down yourself in advanced mode (not easy at all).

Edit, to change the bitrate numbers you must change the small numbers template (the font image with only one to ten).

[PaaP]

hmm I suck in that stuff :S
But I still found a Skin Which I like... I tried to make one on my own but I blew up my Player whit that.
Question why does the American h3xx has these buttons :
||> / on
|=| / of

and the European ones only:
||>
|=|

||> = play and pause
|=| = stop

[Jolt]

The first thing most people do when faced with an electronic device is how to turn it on. I think the On/Off written on the Play/Stop buttons was just more helpful. Why they only put it on the US players, who knows

This thread is getting a little off topic............... ....

__

[PaaP]

Who knows mabey the makers of Iriver think European are smarter :P Like me hehe.
I life in the Netherlands. I do know that we learn more in school. I am 16 years old and speak English German French and Dutch :P.
Really Getting of Topic now

[Lord Julius]

@aokh1979: I didn't create any fonts. H3Mod just saves what is
already in the firmware, so there is no way to use bigger characters
than what is predefined. Since fonts are black and white (no anti aliasing),
and working on them with gifs is mostly pixel by pixel, any graphics
program will do. It's more a question of patience than tools here...

[ghostface_killah24]

Here I have put more work into Pixel10. I think it worked out great. Here are some samples.

http://www.misticriver.net/photos/al...76/Txtmode.JPG
http://www.misticriver.net/photos/al.../15376/Txt.JPG
http://www.misticriver.net/photos/al...15376/Mode.JPG
http://www.misticriver.net/photos/al...n%20screen.JPG
http://www.misticriver.net/photos/al...5376/Album.JPG

Sorry, I don't really know how to show images.

Here is the fixed version: http://www.misticriver.net/photos/images/thumb_zip.jpg

*some of the pictures you see are not really exact as I kind of messed around with H3mod. Like some of the text on the screen looks off, but I assure you that it looks great on the player.

[Chrimson]

Yeah thats pretty nice. I like it.

[TheCowBoX]

Wow, it would be cool if that wasn't a link to an image.

[Chrimson]

Here is my new font, called square. I have only attached latin extended as that is all you need. The image for the font is here

http://img117.echo.cx/img117/6563/la...ded8x168wa.gif

Hope you enjoy, comments welcome!

[fastRX8]

Originally Posted by ghostface_killah24

Time for me to contribute to the Community.

Here I present to you, The Snoot.org Pixel10 Font Pack.

It is a fine, clean font which I believe is very clear to read.

The only bad thing is that the W both capital and little are slashed. Not a big thing, though the little w looks like an upper case small n, but I think you can tell the difference.

*Sorry, I don't know how to get a screenshot like the others.

I liked this font very much. I fixed the "W" & "w".

Here's a screenshot


and the file.

- RX8 -

[Bondold]

Hi all!

After changing the font to Arial (FW 1.29j) and loading a new skin, the player started to hang if trying to go to the menu. So that means it plays Musik, but its not possible to downgrade or regrade FW and change any options inside of player. Is this the END? How to update the FW to normal, how to make it runs again?! (((( THX to all!!!

[prasit_paul@hotmail.com]

Have anyone try to put the rockbox firmware with the additional fonts (such as thai font) yet?

[Bondold]

Well..... i never seen something like that. I dont think i