| Home | Forums | Register | FAQ | Search | Today's Posts | Mark Forums Read |
|
Welcome to the misticriver forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
| Tags: cf mod, compactflash, rockbox |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Problems with CF mod
Hello all. As near as I can tell, I've successfully upgraded my ihp 120 to use a 32GB AData Compactflash card. I'm also running the latest rockbox build(I've been upgrading it rather religiously).However , I've run into a few problems. The biggest one is that every time I disconnect my USB connection from my computer, I've had to use the reset button to get the iriver going again. While this isn't the end of world by any means, it's a pretty big inconvenience. Is there a work-around for this problem?
The other problems have been fairly minor - little hangups as I navigate rockbox, and can be dealt with by using a little patience. Also, I want to give a big thanks to a lot of the members here. I've been lurking for a while, and a lot of the guides have been very helpful. |
|
|||
|
I'm using h120 bootloader v7 pre4 as per the CFmod wiki at the rockbox site. I've been using the current rockbox builds as well. If it makes any difference, I'm running Rockbox from the RAM, but I've tried running it from the ROM, and it still needs a reset when it's disconnected from USB.
|
|
|||
|
It actually won't boot from the disk. When I make that selection, it just hangs on "executing command." It will only load from the RAM or ROM.
No, it worked flawlessly with the original hard disk. Quote:
|
|
|||
|
When it needs a reset at disconnect, is that because it still thinks the USB is connected?
Could it be you damaged the connection between main board and daughter board (which hosts USB and IDE) ? We shall continue this on the RB forum as soon as you start your thread there
__________________
http://www.rockbox.org/ |
|
|||
|
Quote:
Quote:
Quote:
|
|
|||
|
The CF mod works in the H120 even if you use a high capacity replacement battery right? I noticed that my case fit much more snug with my new battery and am wondering if a CF adapter+Card would be too thick.
|
|
|||
|
You will need to bend the jumper, but that's about it...
__________________
http://www.rockbox.org/ |