This image is the top of the content box. Unfortunately, there is no information-based reason for this div to be here. It's just here for design reasons. Sorry.
Home Forums Register FAQ Search Today's Posts Mark Forums Read


Welcome to the misticriver forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.
Tags: , ,

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 14th, 2007, 03:17 PM
Newbie Floating Down The Mistic River
  
Join Date: Oct 2007
Location: left coast
Posts: 4
Red face DB Open Error
I attempted the MTP/UMS conversion described. I have gotten to this Point - "DB Open Error. Connect iriver plus And DB Update”. Don’t worry about this error because a media database generated in MTP mode is not compatible with UMS mode. Use iriver plus or EasyH10 to recover this error. However, I cannot get beyond it
I have attempted to Run EasyH10. It builds the database, but i continue to get the message. Also there are two folders, one marked "Media" and the other "Music", as opposed to Media/music. In addition, I have no idea what it means to " Make sure to use an appropriate UMS model template. " any help would be terrific
__________________
Oldog
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old October 14th, 2007, 08:42 PM
Newbie Floating Down The Mistic River
  
Join Date: Oct 2007
Posts: 1
Hello...I'm having the same problem, and I'm here to join in the search. For some reason, I keep getting the DB Error message and it won't go away.
I've tried rebuilding my songlist with the Easy H10, and also reinstalling my firmware. Doesn't seem to help. I have just deleted all of my songs off of the H10 in order to clean it out...but still no luck.
I'm a Canadian, but I bought my H10 in Japan. I think it's the opposite of what north american models are. It's not the UMS model. So I don't know if that will present more problems. Though I did download the firmware update from the japanese site. So it should be a part of the problem.
Any help would be a god send. thanks
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old October 15th, 2007, 08:14 AM
Eager Mistic Beaver
  
Join Date: Dec 2006
Posts: 202
Are you both sure you have EasyH10 configured correctly. You need to tell it what type of H10 you have, because the database formats vary slightly. Also when you run Easy H10 set it to the mode where it creates a NEW database, not where it updates an existing one. Does EasyH10 give you any sort of errors?

Gary
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old October 15th, 2007, 04:20 PM
Newbie Floating Down The Mistic River
  
Join Date: Oct 2007
Location: left coast
Posts: 4
Smile easy h10 config
thanx for your reply - i'm not at all sure that easy h10 is correctly configured - i have a 6 gb h10 that was problematic from the beginning. i visited iriver.com and downloaded latest firmware. 8 of 10 attempts at trnsferring music recieved "unspecified error" message. I then attempted the MTP/UMS conversion. it appeared to work, easy h10 built a new database on the device. all looked good. however, when i disconnected the the h10 from the pc, the error message "DB Open Error. Connect iriver plus And DB Update” appears. At this point i am stuck. Is this enough info. thanx again
__________________
Oldog
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old October 18th, 2007, 11:56 AM
Eager Mistic Beaver
  
Join Date: Dec 2006
Posts: 202
In EasyH10 you have to tell it SPECIFICALLY which model you have. It needs to know if it is a H10 or H20, the size of the drive (5gb, 6gb, etc) and the format MTP or UMS. This is done from a single drop down menu as I remember (don't have it with me). Then make sure you select the option to build a NEW datbase, not the one to update an exsiting database.

Gary
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old October 19th, 2007, 01:29 PM
Newbie Floating Down The Mistic River
  
Join Date: Oct 2007
Location: left coast
Posts: 4
Thumbs up UMS conversion problems sorta solved
I am now up and running but could never get easy h10 to work properly - i ended up deleting (through MS explorer) everything including systems files - reinstalling the UMS bootloader and then installing iriver plus - works like a charm after far too many hours - thanx again for your responses scuderiaconchigliathey kept me going when i wanted to throw it back to ebay
__________________
Oldog
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

« Previous Thread | Next Thread »

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 06:11 PM.

Contact Us - MisticRiver :: For iriver Enthusiasts - Archive - Top

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
This image is the bottom of the content box. Unfortunately, there is no information-based reason for this div to be here. It's just here for design reasons. Sorry.