| Home | Forums | Register | FAQ | Search | Today's Posts | Mark Forums Read |
|
Welcome to the misticriver forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Hello i have a H10 (20gb color) iriver, i have xp w/ sp2 installed and windows media player 10. i have tryed to connect my iriver to my pc with no success. the screen shows USBconnected, but windows wont reconize it. I have dl UVCView.x86.exe and ran it, altho my other devices (pc cam) shows up in the usb the iriver dosent, i switched plugs and still the same. i used the usm trick and rebooted and still have no success. i even checked to make sure that Everyone is enbaled in my regedit. please help, thanks.
|
|
|||
|
Take a look at Ted Yo's device enumeration thread. There is a link in my sig.
P.S. Welcome to MR. |
|
|||
|
0) Is your device connecting in MTP mode?
no 1) Does your device show up in Device Manager? no 2) Does your device show up in My Computer? no 3) Does your device show up in WMP? no Last edited by majikl : April 20th, 2006 at 08:30 PM. |
|
|||
|
Have you read through the whole thread and tried all the fixes?
|
|
|||
|
with the usb hub plugged in i ran UVCView.x86.exe *(wich is a usb device viewer)* and got
External Hub: USB#Vid_0409&Pid_005 9#5&24d84a6d&0&1#{f1 8a0e88-c30c-11d0-8815-00a0c906bed8} Hub Power: Self Power Number of Ports: 4 Power switching: Individual Compound device: No Over-current Protection: Individual ---===>Device Information<===--- ConnectionStatus: Current Config Value: 0x01 -> Device Bus Speed: High Device Address: 0x01 Open Pipes: 1 ===>Endpoint Descriptor<=== bLength: 0x07 bDescriptorType: 0x05 bEndpointAddress: 0x81 -> Direction: IN - EndpointID: 1 bmAttributes: 0x03 -> Interrupt Transfer Type wMaxPacketSize: 0x0001 = 1 transactions per microframe, 0x01 max bytes bInterval: 0x0C ===>Device Descriptor<=== bLength: 0x12 bDescriptorType: 0x01 bcdUSB: 0x0200 bDeviceClass: 0x09 -> This is a HUB Device bDeviceSubClass: 0x00 bDeviceProtocol: 0x01 bMaxPacketSize0: 0x40 = (64) Bytes idVendor: 0x0409 = NEC Corporation idProduct: 0x0059 bcdDevice: 0x0100 iManufacturer: 0x00 iProduct: 0x00 iSerialNumber: 0x00 bNumConfigurations: 0x01 ===>Configuration Descriptor<=== bLength: 0x09 bDescriptorType: 0x02 wTotalLength: 0x0019 -> Validated bNumInterfaces: 0x01 bConfigurationValue: 0x01 iConfiguration: 0x00 bmAttributes: 0xE0 -> Bus Powered MaxPower: 0x32 = 100 mA ===>Interface Descriptor<=== bLength: 0x09 bDescriptorType: 0x04 bInterfaceNumber: 0x00 bAlternateSetting: 0x00 bNumEndpoints: 0x01 bInterfaceClass: 0x09 -> HUB Interface Class bInterfaceSubClass: 0x00 bInterfaceProtocol: 0x00 CAUTION: This may be an invalid bInterfaceProtocol iInterface: 0x00 ===>Endpoint Descriptor<=== bLength: 0x07 bDescriptorType: 0x05 bEndpointAddress: 0x81 -> Direction: IN - EndpointID: 1 bmAttributes: 0x03 -> Interrupt Transfer Type wMaxPacketSize: 0x0001 = 1 transactions per microframe, 0x01 max bytes bInterval: 0x0C |
|
|||
|
i ve been jammin to the local staitions on the iriver, fumblin with dif settings, still a no go.
i am starting to think this is a faulty usb cord, since the usb hub has power and it detects other devices. i have 5hrs till iriver toll free # opens till then <////////////>~~ and - #misticriver on WNY.US.ZUH.Net *( irc ) |
|
|||
|
Have you tried a separate PC?
|