Quote:
Originally Posted by RoboWolf
As far as I know this only works on version 0.15.
I don't know if this will help any1 but oh well.
When I first go my e10 i wanted to put movies on so i got iriverter (one of the best programs) wouldn't go on to it right.But I figured it out (and this might apply to other iriver products)
1.Go to your iriverter folder and go into profiles. If your product is not there you can make a profile. I will use my e10 as example.
2.Copy one of the profiles already there and rename it whatever and go into it.It should have writing somewhere(at the top) like bit rate and stuff like that.
3.Basically all you have to do is change the name. E.G. device=e10. Then go across to dimensions and change that to suit your device. E.G. For e10 change it to 128x128.
4.Start iriverter go into options device and click on the new profile.
There you go. I have only tried avi,quicktime and wmv formats but it converts fine with no problems. Note- When converting quicktime formats the progress bar will not fill. Don't worry it's still converting.
when i say wouldn't go onto it i mean my e10
|
Cool, this is excellent, thanks for the tip off!
For other X20 users:
brand=iriverdevice=X 20maxVideoBitrate=51 2maxAudioBitrate=128 dimensions=320x240ma xFrameRate=30
wrapperFormat=aviaud ioFormat=mp3