Many months ago, I came to this site and offered up tp do some custom inskins. However, due to reasons I will not go into (financial reasons), I couldn't deliver my promises since I had no time for it at all. I'm terribly sorry I left many of you waiting with no results.
As a token of my apology, I offer this:
Ladies and gentlemen, I give you the iriver H3xx series & Go-Vibe V5 special edition custom skins: Orange Theme. (note: the Go-Vibe V5 is a dedicated headphone amp that improves the sound quality of the iriver. You might want to look up the site on the label if you are interested. I recently purchased one and it is good stuff).
This was all done from scratch using photoshop (except for the "instruments" of the band; those are simply photos I looked for in google and resized to fit my design accordingly (hey, expecting me to draw that as well would just be asking too much from me, you know!)
ENJOY!
Click thumbnails for bigger picture:
Amp and iriver H320 (frontside)
Amp and iriver H320 (backside)
For GoVibe V5 inset:
For H320:
For H340:
PRINTING INSTRUCTIONS! THIS IS VERY IMPORTANT!: The pictures you see here are not at the correct size for printing. You must have photoshop or some other image-manipulating software that lets you resize pictures. I had to save duplicates in a smaller size because imageshack cannot host the true sizes (I exceeded the limit by just a little! argh! How annoying!). Thus, the pics you see here are set at a resolution of 100 pixels/inch. You MUST change that to 300 pixels/inch (which sets the picture to 1684x1338 pixels), save it, then open up H3Tool (here's the link for downloading H3Tool:
Download H3Tool). Once there, click on the "Create Inskin" icon and pick "open inskin." Well, open the one you just resized, obviously. Remember to check or uncheck the box in H3Tool that corresponds to what you are printing (h320 or h340). Use the "Print" function in H3Tool, and you're set to go! (Read up on misticriver on how to take apart your H3xx).
If, for some reason, you cannot resize the pics for H3Tool, send me a private message with an e-mail to which I can send the correctly-sized inskin.
As for printing the GoVibe V5 label, simply import the picture into word, and print it on your paper/label of choice.
Info for the curious: The reason I decided to go with the "orange theme" was because ipod is apple. And the iriver h3xx series are NOT like ipods at all. It's like comparing apples and oranges... apple's ipods and iriver's oranges. Get it? Oh forget it... you people don't even indulge me a bit.
ROCKBOX WPS now available!:
Teaser:
H3xx Rockbox 24bit Color WPS here. No Discussion (56K Warning)
Post 220 (continues on post 221 on page 12, make sure to download both parts)
BIG UPDATE! FULL CUSTOMIZATION OPTIONS NOW AVAILABLE! GO HERE FOR ORANGES2!:"Screaming Oranges" WPS & INSKIN MEGA THREAD (