Hey Guys...I have the pinouts from the AFT-200 FM Transmitter...
There are 6 wires in connected to the pins.
Blue and
Purple
Red
Green
Yellow
and Black.
Hopefully you guys can read the pinouts from this diagram.
Connectivity is as follow:
With the negative probe of a multimeter on the first mentioned wire:
Red is connected to
Blue/
Purple
Blue/
Purple is NOT connected to
Red
(the above doesn't really make sense to me, as the voltage is -5V...so doesn't that rule out a diode?!??..I don't know, perhaps someone more "electrically inclided" can explain it?)
Black is connected to
Green
Green is connected to Black
Black is connected to
Yellow
Yellow is connected to Black
Yellow is connected to
Green
Green is connected to
Yellow
So, if you want to make your own charger, you'll probably only have to worry about pins 2, 4 and 5
If you're in canada, you can find cell phone tips for the LG phone that is the same connector as the clix. They have it at "The Source by circuit city". Its about $10. I bought one, and you can open it up, hack it to remove the pins (there are 4), solder wires onto them, and place them where you want. You guys may want to look into it if you wan't to make a charger without using your cable that came with the device.
As for the black, green and yellow cables. I'm not sure what they are...Most likely they are line in to the FM Transmitter so it can transmit sound, but I havent put a speaker on the wire to try it out.